If I remember correctly, two nuts below the baseplate. One nut below is ok
if mortar is used below baseplate.
This was detailed in the drawing package I received.
Brad - N8SNM
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Tuesday, April 13, 2010 2:00 PM
Subject: Re: [TowerTalk] Where should the nuts go?
> In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,
> firstname.lastname@example.org writes:
>> Just putting up a new TX455. The base plate comes with 3 nuts on each
> bolt embedded in the concrete. Question is: Do 2 nut belong below the
> baseplate for locking the level, and one nut above the plate, or the
> way around with one nut below and 2 nuts above?
> The weight of the tower will keep the bottom nuts from going anywhere.
> You double nut the top of the bolts to make sure they won't go anywhere
> Steve K7LXC
> TOWER TECH
> UST Factory authorized installer
> TowerTalk mailing list
TowerTalk mailing list