[Top] [All Lists]

Re: [TowerTalk] Stripping LMR-600

To: "'Tower and HF antenna construction topics.'" <>
Subject: Re: [TowerTalk] Stripping LMR-600
From: "W0MU Mike Fatchett" <>
Reply-to: "Tower and HF antenna construction topics." <>
Date: Wed, 21 Apr 2010 11:58:38 -0600
List-post: <">>
I use a stripping tool.  They are great!

CC Packet Cluster W0MU-1

"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin 

-----Original Message-----
[] On Behalf Of Tommy Alderman
Sent: Wednesday, April 21, 2010 4:57 AM
To: 'Tower and HF antenna construction topics.'
Subject: [TowerTalk] Stripping LMR-600


What is the recommended tool for stripping LMR-600 for a type-N connector?
Do most of you use just a sharp blade and careful measurements or do you
recommend the purchase of a stripping tool? If you use a stripping tool, can
you give me a model number and a source please? I'm going to be doing a
limited quantity of less than ten connectors.


Thanks for any information.


Tom - W4BQF



TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>