[Top] [All Lists]

Re: [TowerTalk] FW: Re Force12 C19XR

To: "Tower and HF antenna construction topics." <>
Subject: Re: [TowerTalk] FW: Re Force12 C19XR
From: Neil & Heather <>
Reply-to: "Tower and HF antenna construction topics." <>
Date: Sun, 25 Apr 2010 18:24:38 -0400
List-post: <">>

Interesting story on this C19XR,
I picked it up from a ham in Odessa, NY,
W2AD, who moved to AZ.,very recently.
I'm almost positive he said he got it from a W6
who lived up the road a ways in NY,
and had actually designed this antenna.
I just noticed Your Freeville, NY., QTH,
I'm wondering if you are the W6 he was referring to??
If so, It looks like I have one of the 1st C19XR's
and, I'm glad to say, after some "polishing" up,and
re-riviting...looks just as good as true
testament to the build quality of
the force12 line...
Thought you might be interested in this info... :)
Again, thanks for the help and advice...


On 4/25/2010 12:03 AM, Natan Huffman wrote:
> -----Original Message-----
> From:
> [] On Behalf Of Natan Huffman
> Sent: Saturday, April 24, 2010 11:30 PM
> To: 'Tower and HF antenna construction topics.'
> Subject: Re: [TowerTalk] Re Force12 C19XR
> Neil,
> I'm glad you saw that!  The balun wires go to the 10 meter driver.  You'll
> have two wires then connected from the 10 driver to the 20 meter driver.
> The 15 meter driver is part of the open sleeve and thus is parasitically
> connected to the 15 meter cell.  Depending on the rev level of the C19XR,
> the closed sleeve (two wires running from the 10 driver to the 20 driver)
> may be either an encased set of two wires or just two wires without the
> outer case.  Either works well but the one encased is a bit easier to work
> with.
> 73
> Natan W6XR
> Freeville, NY

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>