Check out the Super Antenna site and see how Vern does it with his antennas.
They are designed for change in frequency and portable use.
Pipe Creek, Texas
Fast cars, slow boats, big dogs, old trucks, little radios, and summers off
On Thu, Jul 8, 2010 at 11:13 PM, jimlux <email@example.com> wrote:
> EZ Rhino wrote:
> > Two ideas:
> > I recently built a portable tower for Field Day and the sections go
> > together with lynch pins. (Google: "Lynch Pins" under Images tab).
> > Or: How about running shock cord through all sections just like tent
> > poles? And finally, if it was me I'd leave the elements and boom
> > assembled and just throw them on top of my car on the roof rack. If
> > the elements are still too long, take them apart into halves.
> > Chris KF7P
> The shock cord idea is kind of interesting. you'd need to glue/fasten a
> stop inside the larger tube to limit how far the smaller tube goes in,
> but that could be almost anything.. A plastic plug that is a snug fit
> and you hammer it in?
> The shock cord keeps it all together.
> you'd need to bring some sandpaper every time you assemble, though, to
> make sure you get a good connection.
> The other thing would be to use some sort of quick disconnect fitting
> (like on air hoses). They're a bit heavy compared to aluminum tubing,
> but they are spring loaded.
> And moving in that direction, what about just using BNC connectors or
> some other bayonet mount scheme. You could get just the shells for
> standard circular multipin connectors (they're available in plastic, as
> well, for a few bucks each)
> What about a big Anderson PowerPole? THey're pretty rugged, have a fair
> amount of force required to separate them. I don't know if they have the
> bending rigidity you'd need. You'd glue it to the ends of the two tubes.
> Something like a bananaplug on the end of the smaller tube, and a buried
> banana jack inside the larger tube?
> There's also garden hose quick connects.
> TowerTalk mailing list
TowerTalk mailing list