[Top] [All Lists]

Re: [TowerTalk] Joining Phillystran and EHS

To: "Mark Robinson" <>, <>
Subject: Re: [TowerTalk] Joining Phillystran and EHS
From: "Richard M. Gillingham" <>
Date: Fri, 23 Jul 2010 11:23:02 -0400
List-post: <">>
You can use the thimbles like that or join them with a shackle..

Gil, W1RG

----- Original Message ----- 
From: "Mark Robinson" <>
To: <>
Sent: Friday, July 23, 2010 10:42 AM
Subject: [TowerTalk] Joining Phillystran and EHS

>I am getting ready to assemble the top guys on my rohn 45 tower. I intend 
>to use a short length of 1/4ehs at the top and maybe 27 feet of 1/4 ehs at 
>the bottom. I will be using a length of Phillystran HTP667001 in the 
>middle. I will use the PLP2755 big grip on the philly with a 1/2 inch 
>thimble. I will be using a BG2144 big grip on the 1/4 ehs together with a 
>3/8 thimble. My question is how to join the ehs and the philly together. 
>Can I just use the two thimbles looped inside of each other at the joint or 
>do I need a shackle or maybe a 502 insulator between the two big grips.
> The shackle would need to be fairly substantial to have a working load 
> near to that of the cable at 6000 pounds. How have other people made this 
> connection?
> 73 Mark N1UK
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>