[Top] [All Lists]

Re: [TowerTalk] Joining Phillystran and EHS

To: <>
Subject: Re: [TowerTalk] Joining Phillystran and EHS
From: "W3YY" <>
Date: Fri, 23 Jul 2010 15:41:14 -0000
List-post: <">>
Mark -

You can see the method I used to joing EHS and Philly together at

73, Bob - W3YY

-----Original Message-----
[] On Behalf Of Mark Robinson
Sent: Friday, July 23, 2010 2:43 PM
Subject: [TowerTalk] Joining Phillystran and EHS

I am getting ready to assemble the top guys on my rohn 45 tower. I intend to
use a short length of 1/4ehs at the top and maybe 27 feet of 1/4 ehs at the
bottom. I will be using a length of Phillystran HTP667001 in the middle. I
will use the PLP2755 big grip on the philly with a 1/2 inch thimble. I will
be using a BG2144 big grip on the 1/4 ehs together with a 3/8 thimble. My
question is how to join the ehs and the philly together. Can I just use the
two thimbles looped inside of each other at the joint or do I need a shackle
or maybe a 502 insulator between the two big grips.

The shackle would need to be fairly substantial to have a working load near
to that of the cable at 6000 pounds. How have other people made this

73 Mark N1UK

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>