I use a transit and a Loos tension gauge.
Subject: [TowerTalk] Plumbing a Towerl
From: "Mark Robinson" <firstname.lastname@example.org>
Date: Mon, 26 Jul 2010 20:19:54 -0400
I will be hooking up my first set of guys on my Rohn 45 tower tomorrow. When
I get the rest of the tower up (86 feet) and the second set of guys hooked,
I imagine that I will have to check the plumb of the tower as well as
setting the guy wire tension. How do people check the plumb. I could drop a
line down the middle of the tower from the top to the bottom and check the
distance from this line to the legs but I have had trouble in the past with
the wind blowing a plumb line like that.
Any advice and descriptions of the methods that other people have used would
73 Mark N1UK
TowerTalk mailing list