Tim, About ten years ago I did some optimizing on the 155ca using YO
software. I still have the software but its not loaded and is a DOS based
program. I can check through my files as I know I never throw away any
antenna files. I should still have the spacing and tapper schedule if you
My modeling was for a single antenna and did not model it as a stack so not
sure how it would behave in that environment. The antenna worked very well
and I sent my findings to Hy-Gain and Roger (do not recall his call) wrote
back and said he really liked the results but they would stand pat on what
they were using.
73 Pete N4KW
----- Original Message -----
From: "Tim Wininger" <firstname.lastname@example.org>
Sent: Saturday, July 31, 2010 4:59 PM
Subject: [TowerTalk] Hygain 155CA to N6BV spec's
>I looked back thru the achieves but didn't get much data on
> anyone trying N6BV published mods of the Hygain 155BA/CA .
> So here's the question again:
> Need input/experiences of any op that has re dimensioned the 155.
> I am getting ready to stack a pair and would like to have a broader SWR
> Looking at YW this seems to be the answer however after reading KL7RA's
> post of a few years back it seems that there could be some cut and try
> involved. I know that's the case as not many cookie cutter guarantees in
> Thanks for any info,
> Tim, KY5R
> "in the Heart of Dixie"
> TowerTalk mailing list
TowerTalk mailing list