Gary, Forgot to say that the "Super Sawzall" is a reciprocating saw. Last
week I had to cut off a few guy anchors that were 1.25" in dia solid steel
and this saw did the job in short order. Tim the tool man would have loved
73 Pete N4KW
----- Original Message -----
From: "Pete-N4KW" <firstname.lastname@example.org>
To: "Gary Slagel" <email@example.com>; "TowerTalk"
Sent: Saturday, July 31, 2010 10:47 PM
Subject: Re: [TowerTalk] cutting galvanized tower legs
> Gary, Go to your local rental store and rent a "Super Sawzall" (sp) and
> pick up some blades, it will eat those tower legs for you. Good luck.
> 73 Pete N4KW
> ----- Original Message -----
> From: "Gary Slagel" <firstname.lastname@example.org>
> To: "TowerTalk" <email@example.com>
> Sent: Saturday, July 31, 2010 7:40 PM
> Subject: [TowerTalk] cutting galvanized tower legs
> Hi guys,
> My triex w51 crankup folded over in a windstorm the other day. I'm going
> to have to do some cutting on it to get it all the way down and apart.
> What is the best way to cut this stuff? Is there a metal cutting blade I
> can put in a circular say? Some kind of metal cutting disk I can use with
> my handheld disk grinder/sander?
> Thanks for advice.
> Gary Slagel/N0SXX
> Hot Springs, SD
> TowerTalk mailing list
TowerTalk mailing list