TNX Pete fer the reply.
Yes if you run across the file pse pass it along.
I have tried to find a copy of YO but nw no longer being produced.
I have found Antenna Model by Teri software that is similar however.
TNX again for any info you pass along,
On Sat, Jul 31, 2010 at 9:39 PM, Pete-N4KW <firstname.lastname@example.org> wrote:
> Tim, About ten years ago I did some optimizing on the 155ca using YO
> software. I still have the software but its not loaded and is a DOS based
> program. I can check through my files as I know I never throw away any
> antenna files. I should still have the spacing and tapper schedule if you
> want them.
> My modeling was for a single antenna and did not model it as a stack so not
> sure how it would behave in that environment. The antenna worked very well
> and I sent my findings to Hy-Gain and Roger (do not recall his call) wrote
> back and said he really liked the results but they would stand pat on what
> they were using.
> 73 Pete N4KW
> ----- Original Message ----- From: "Tim Wininger" <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Saturday, July 31, 2010 4:59 PM
> Subject: [TowerTalk] Hygain 155CA to N6BV spec's
> I looked back thru the achieves but didn't get much data on
>> anyone trying N6BV published mods of the Hygain 155BA/CA .
>> So here's the question again:
>> Need input/experiences of any op that has re dimensioned the 155.
>> I am getting ready to stack a pair and would like to have a broader SWR
>> Looking at YW this seems to be the answer however after reading KL7RA's
>> post of a few years back it seems that there could be some cut and try
>> involved. I know that's the case as not many cookie cutter guarantees in
>> Thanks for any info,
>> Tim, KY5R
>> "in the Heart of Dixie"
>> TowerTalk mailing list
TowerTalk mailing list