I concur regarding the Telrex design. They are old designs with equally
spaced elements and unfortunately since the elements go though the boom,
they are difficult to optimize. I sold all of mine years ago. I am not
familiar with 6m propagation and what advantages stacking may have, but as
far as peak gain goes, you are probably better off with the single 9el M2
Subject: Re: [TowerTalk] 2 telrex 6m624's versus M2 6m9khw
In my opinion any old telrex should be run through an optimizer before being
put back up on a tower. I tested and retuned 3,4,and 6 ele 20m, 8ele 15m,
and a big 10m one... they all needed major retuning, the 10m one was a
better 11m antenna than 10m. when the 6 element 20m was optimized one whole
element was virtually worthless, on the 8 ele 15m the optimizer removed 3
elements to make it better!
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Joe Barnes [mailto:email@example.com]
> Sent: Saturday, August 14, 2010 19:40
> To: firstname.lastname@example.org
> Subject: [TowerTalk] 2 telrex 6m624's versus M2 6m9khw
> I have 2 telrex 6m624's ( 6 elements 24 foot boom) that I am planning to
> stack with a tennadyne t10 between them.
> The Telrex's will be stacked 14 or so feet apart per telrex's
> My question is that do you think that the telrex's will perform better
> than say a M2 6m9khw?
> I know that nothing will last like the telrex's but that is another
> Thank you for your help.
> Joe N4JBK
TowerTalk mailing list