[Top] [All Lists]

Re: [TowerTalk] Lifting Mechanism for a Tower

To: "Anthony J. Cioffi \(N2KI\)" <>, <>
Subject: Re: [TowerTalk] Lifting Mechanism for a Tower
From: "Jon Pearl - Laptop" <>
Date: Mon, 16 Aug 2010 23:00:40 -0400
List-post: <">>
Hi Tony.
I use one of these that's attached to a welded aluminum plate/shelf that is 
bolted to the side of my tower where the Fulton style winch was originally 
mounted.  It's essentially an engine hoist that's mounted in an inverted 
fashion to lift sections #2 and #3 (355 lbs. for the pair) of my US Tower 
TX-455.  It works well for the few times a year that I actually drop the 
tower and it's relatively quick.  All of the boat hoists below are driven by 
reduction pulleys and worm gear and are a bit slower but I'm sure they'll 
outlast the hoist that I'm using.
Long, about the middle of this page you'll find "The difference between a 
winch and a hoist."
Some background info on boat hoists...
There's a plethora of this stuff out there...


Jon Pearl - W4ABC

----- Original Message ----- 
From: "Anthony J. Cioffi (N2KI)" <>
To: <>
Sent: Monday, August 16, 2010 9:01 PM
Subject: [TowerTalk] Lifting Mechanism for a Tower

> Can anyone suggest a mechanical lifting mechanism for a Universal HD21-70 
> (aluminum) tilt over tower?  I am thinking along
> the lines of a winch but do not have any engineering skills and could use 
> some help.
> Thank you
> Anthony - N2KI
> 30MDG - 1187

__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 5371 (20100816) __________

The message was checked by ESET NOD32 Antivirus.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>