Towertalk
[Top] [All Lists]

Re: [TowerTalk] Protecting a Tower Relay Box

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Protecting a Tower Relay Box
From: <john@kk9a.com>
Date: Tue, 17 Aug 2010 20:10:21 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The best thing you could do is shorten your control wire and mount the relay 
at the tower base.

John KK9A



To: <TowerTalk@contesting.com>
Subject: [TowerTalk] Protecting a Tower Relay Box
From: "Mark Robinson" <markrob@mindspring.com>
Date: Tue, 17 Aug 2010 19:40:13 -0400

I am intending to fit this relay box at the 80 foot level on my tower

http://www.arraysolutions.com/Products/dualfeed.htm#top%20of%20page


I planned on using wire like this to feed 12V to the relay

http://www.lowes.com/pd_314364-20424-55269-S4-08_4294821905_4294937087?productId=3128549&pl=1&currentURL=/pl_Electrical%2BWire%2Band%2BCable_4294821905_4294937087_?cm_cr=Electrical-_-Web%20Activity-_-Electrical_A1_Activity-_-SC_Electrical_Area1-_-19604_1

since it was readily available and cheap. I know that I don't need wire this
thick but it is cheap. I plan on using a cheap Radio Shack 12V psu in the
shack. I  don't want this cable tied into my expensive Astron 12V supply
which could be damaged by lightning and then feed the pulse into any other
equipment tied to the shack 12V DC bus.

I am planning on protecting the 12V line with "MOV Metal Oxide Varistor
24Z50 Harris 100J" on each line to ground at the base of the tower and at my
SPG box. Adding some inductance just before the entry to the house might
help too.  I started thinking about this and was figuring that it might help
to ground the 12V return wire to the tower at the top and bottom of the
tower and at the SPG box. I wouldn't need MOV's on that return line then. I
am not sure if this will provide any benefit from lightning. Taking this
thought a bit furrther, maybe I could run the power down the tower using
some old coax. The center conductor would carry the 12V positive and the
return would be on the shield which would be grounded at the top and bottom
of the tower and at the SPG box. Will using coax in this way provide any
benefit over the wire from Lowes



thanks  Mark N1UK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>