Towertalk
[Top] [All Lists]

Re: [TowerTalk] Homebrew Exothermic Mold

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Homebrew Exothermic Mold
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Sat, 21 Aug 2010 14:04:52 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

On 8/21/2010 1:47 PM, Mark Robinson wrote:
> Interesting. Thank you for sharing this.  Useful information
>
>
> I have had good luck with Harris Stay Silv 15 and my oxy acetylene torch.
IIRC only the "Exothermic weld" meets code.

73

Roger (K8RI)
>
> Mark N1UK
>
>
>
> ----- Original Message -----
> From: "David Gilbert"<xdavid@cis-broadband.com>
> To: "towertalk"<towertalk@contesting.com>
> Sent: Saturday, 21 August, 2010 12:54 PM
> Subject: [TowerTalk] Homebrew Exothermic Mold
>
>
>> I fabricated my own Cadweld-type mold for making ground rod connections
>> while I was installing my tower about a year and a half ago, but I only
>> recently uploaded the description and pictures to my web site.  It's an
>> easy procedure and with a little thought a mold could be made for just
>> about any configuration or purpose.  Here's the link in case anyone
>> might be interested.
>>
>> http://www.ab7e.com/exothermic/AB7E_Homebrew_Exothermic_Mold.html
>>
>> At the time I even tried to make my own weld powder (thermite).  It's
>> fundamentally a combination of copper oxide and aluminum power and the
>> formula was simple to figure out, but I couldn't find materials with the
>> right particle size.  The stuff I found was all very fine powder and
>> while the mixture reacted, it did so too quickly and the result was more
>> like the old flash trays they used for taking photographs in the
>> 1800's.  If I could find an easy source of coarser powder I might try it
>> again sometime, but in reality you can usually find regular Cadweld weld
>> metal on eBay for the equivalent of one dollar per shot or less.  I
>> always look for the largest containers I can (usually 200 grams) because
>> they usually are the cheapest per gram.  I can typically get three shots
>> out of one 200 gram cylinder.  Don't worry about running out of the
>> starter powder (which appears to be just the same formula with smaller
>> particle size like I played with anyway) ... 4th of July sparklers work
>> fine to fire off the regular Cadweld powder.
>>
>> 73,
>> Dave   AB7E
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>