Cool, thanks for the info Jim!
Not sure that's the right product for the flaking fiberglass box I have,
however I also have been refurbishing various metal types on the tower,
antennas, etc. Been using a "rust converter" which works well but is a bit
labor intensive...the primer you describe sounds like it'll cut out some
work, and I am always in favor of that!
Tnx es 73
----- Original Message -----
From: "Jim Hargrave" <email@example.com>
To: "K0DAN" <firstname.lastname@example.org>; <email@example.com>
Sent: Saturday, August 28, 2010 9:00 AM
Subject: RE: [TowerTalk] FIBERGLASS BOX
> You can purchase self etching primer at most any auto parts store. I get
> mine from NAPA. It runs around $6 for the large spray can. It is good for
> steel, aluminum and fiberglass.
> You can paint it with most any good quality exterior paint. Another paint
> option is the pickup Bed liner paint. Its very durable and also comes in a
> spray can for small jobs.
> 73's Jim
>> -----Original Message-----
>> From: firstname.lastname@example.org
>> [mailto:email@example.com]On Behalf Of K0DAN
>> Sent: Friday, August 27, 2010 10:41 PM
>> To: firstname.lastname@example.org
>> Subject: Re: [TowerTalk] FIBERGLASS BOX
>> I have an old motorized Tri-Ex LM470 tower. All is well, given periodic
>> I replaced the control box (apparently some type of fiberglass compound)
>> about 12 years ago...the interior components are still in good
>> shape but the
>> exterior of the box is starting to "flake" due to solar radiation and or
>> exposure to the elements.
>> Anyone know of a good paint, PVC, or other compound I can brush over it
>> seal it, stop the deterioration, and buy another 10+ years?
>> Thanks and 73
>> TowerTalk mailing list
TowerTalk mailing list