Roger wrote:
> On 9/27/2010 4:47 PM, Mike Keener wrote:
>> All,
>> My Wetstamp for a Rohn 25G calls for # pieces Schedule 40 pipe W/6" OD at
>> 11.5', I had requested these measurements because I have Grandchildren
>> in the back yard, so I need the guys above the deck.
>> I am having a problem finding the above pipe in the san diego area.
>
> Have you checked with the metal supply houses. I think they are
> referring to structural steel and mot water pipe. Structural steel tube
> comes in both schedule 40 and 80 just like water pipe, but the alloy is
> different, much stronger and more flexible.
>
>> Is there any one out there who may have a good POC for 3 used pieces in this
>> area.
>
> My local metal supply places keep it in stock along with Aluminum tube
> so I'd think the commercial suppliers out there would also have it. OTOH
> they may not want to bother with just 3 pieces about 16' long.
>
>
Sure.. they'll have it in 20+ foot lengths, and cut it to size for you.
You might have to pay for the whole sticks (if you get lucky, they'll
have a 22-23 foot length, and cutting it in half gets you the needed 11
footers)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|