[Top] [All Lists]

Re: [TowerTalk] Yaesu GS-23

To: <>
Subject: Re: [TowerTalk] Yaesu GS-23
Date: Fri, 01 Oct 2010 14:29:51 +0000
List-post: <">>
The 1000/2700/2800 sdx boxes are generally interchangeable, with one minor
exception.  The 1000sdx doesn't have the automatic slowdown before the hard

David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://

> -----Original Message-----
> From: Doug Rehman []
> Sent: Friday, October 01, 2010 14:22
> To:
> Subject: [TowerTalk] Yaesu GS-23
> Does anyone have a manual for the Yaesu GS-23 RS-232 board for the SDX
> series rotator controllers? I found a text only version of it online, but
> that doesn't help with figuring out the baud rate setting which is
> apparently in an illustration.
> Also, can anyone confirm that the same transformer is used in the G-
> 1000SDX
> controller as the G-2800SDX controller?
> I have a G-1000SDX box to use with a 2800 rotator; the 1000SDX transformer
> appears to be the same size as the one in an older 2700S box and is about
> twice the size of the one in an 800SDA box. Interestingly, the 800SDX
> transformer appears to be the larger one as well; did Yaesu start putting
> smaller transformers in the SDA boxes?
> Thanks,
> Doug
> K4AC
> Running for ARRL SE Division Director
> Campaign Website:
> Campaign Blog:
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>