Towertalk
[Top] [All Lists]

Re: [TowerTalk] guy cable use.

To: "Richard Beckett" <w0bvtrich@centurylink.net>
Subject: Re: [TowerTalk] guy cable use.
From: "Mark Robinson" <markrob@mindspring.com>
Date: Fri, 15 Oct 2010 09:32:26 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
ehs cable is so cheap, why risk it. Are you installing 2 sets of guys?  I 
believe that is in the Rohn spec for a Rohn 25 tower at your height. Are you 
using the guy brackets to connect the guys to the tower legs?

Mark N1UK

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
----- Original Message ----- 
From: "Richard Beckett" <w0bvtrich@centurylink.net>
To: <towertalk@contesting.com>
Sent: Thursday, 14 October, 2010 8:35 PM
Subject: [TowerTalk] guy cable use.


> Can I use a non EHS cable to guy my Rohn tower.  I purchased 3/16" steel
> galvanized cable; Cooper Campbell #7000627 from a Lowe's hardware
> store.  It may be similar to aircraft cable, not sure.  Can I use this
> cable to guy my Rohn 25G tower to 70 feet.  Note: I do not plan to use
> anything but wire antennas at this time.
>
> Rich...
> _______________________________________________

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>