Sorry - this was supposed to go to the reflector and not to Steve!
From: Tommy Alderman [mailto:firstname.lastname@example.org]
Sent: Friday, October 15, 2010 3:43 PM
Subject: RE: [Elecraft] Amplifier Cable:K3 to Alpha 8410
I use a short (4') cable between the K3 'Key Out' and my 8410's 'Relay'
input and run high power contest and then QRQ QSO's, without any problems.
It doesn't need to get any more complex than this!
Tom - W4BQF
[mailto:email@example.com] On Behalf Of firstname.lastname@example.org
Sent: Friday, October 15, 2010 2:50 PM
Subject: [Elecraft] Amplifier Cable:K3 to Alpha 8410
It was suggested to connect my K3 to my Alpha 8410 that I could purchase a
shielded cable from Radio Shack. I need one end to be a phono plug and I
assume that the end that connects to the K3 is also a phono plug. Does
anyone have any suggestions looking through the Radio Shack website as to
the cable that would work the best. Thanks for your help! Mark KB3Z
Elecraft mailing list
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
TowerTalk mailing list