On 10/19/2010 10:23 AM, Barry Gross wrote:
> I've received several private replies that indicate folks aren't aware that
> Hy-Gain was installing rear panel mount 8-pin Cinch Jones connectors in the
> later Hy-Gain Ham IV rotor controllers instead of 8-pin terminal strips.
"Some" rotators are getting the Cinch Jones. The tail twister is
getting the round connector for which I've forgotten the name.
Any time I rebuild one, it's getting that new pig tail with the round
> I will proceed with the informed assumption that pin numbers 1-8 are
> identically connected.
> Barry N1EU
> --- On Tue, 10/19/10, Barry Gross<email@example.com> wrote:
>> From: Barry Gross<firstname.lastname@example.org>
>> Subject: Hy-Gain rotor controllers cabling
>> To: email@example.com
>> Date: Tuesday, October 19, 2010, 7:30 AM
>> Can anyone confirm that rotor cable
>> connection pin numbering 1-8 of a T2X terminal block is
>> identical to pin numbering 1-8 of a Ham IV cinch Jones
>> Barry N1EU
> TowerTalk mailing list
TowerTalk mailing list