Good point Ian.
I used a 3/4" box end wrench to hold the shaft in place and tapped the clutches
with a hammer. This freed them up and I was able to get the job done.
This may be off base, but in the future I suspect that removing tension on the
cable if the system will be idle could be a good thing.
> Date: Thu, 21 Oct 2010 07:29:16 +0100
> To: email@example.com
> From: firstname.lastname@example.org
> Subject: Re: [TowerTalk] Fulton K-1550 winch
> Guy Molinari wrote:
> >Thanks to all who responded to my call for help. I got it sorted out.
> Please tell us how, for future reference.
> 73 from Ian GM3SEK
> TowerTalk mailing list
TowerTalk mailing list