That knot was mentioned in a QST not too long ago...
Another option is if you see a utility truck somewhere, stop and nicely
ask if you could have a couple of grips off the back of the truck...
The local coop guys were always nice about throwing me a couple if I asked.
On 10/25/2010 7:58 PM, Don Tucker wrote:
> I've a about 60 feet from the house to the tower. I'd like to get the coax
> and cables off the ground. I can put a big SS screw eye at the 2nd level of
> the house and a SS HD snap hook at the top of the lower crankup tower
> section. The bundle is 4 big coax (213) and 1 small 58X coax, 2 rotor type
> cables and one small cable for 12V.
> I cannot for the life of me remember the knot which produces a nice snubbing
> anchor for use in holding the cable bundles up at each end. I do remember
> from way back that it distributed the holding power across several links in
> the snubbing knot.
> Anyone who can pass this snubbing knot to me I'd me appreciative????
> Don W7WLL
> TowerTalk mailing list
TowerTalk mailing list