On 10/27/2010 7:26 AM, Michael W5NIG wrote:
> ...after my last computer crashed and I replaced it and set up all of my
> email accounts I totally
> forgot about this one till yesterday! Over 1k messages from tower talk!
> lol. I think I"ll keep the
> last 5 or 10 and let the rest go ;>
> I have my old T2X with the terminal strip that was God knows how old when I
> got it, had my friend
> Bob W5FKN rebuild it for me and it was up on the tower for a number of years
> turning a 25ft mast,
> M2 three ele. 40m linear loaded beam and a Force 12 5ba. Of course I rocked
> it to start (darn wedge brake!)
> and always coasted it to a stop! Usually twice a year I would climb up
> there and realign the beam to
> proper direction. (never pinned it)
> ....replacing some tower sections now and will be a while before I get
> aluminum back up but picked up a used
> prosistel 61 for a REALLY good price, but will keep old trusty in the shed
> for my backup :>
Word of caution if it is one of the older "green" PST-61s. The top seal
is a weak point with a reinforcement ridge around it that traps water.
The high carbon steel shaft rusts, then grinds up the seal, water gets
in and trashes the bearings. A simple rubber flange with a slight cone
shape that extends well beyond the ridge, plus packing the recessed area
above the top seal with white lithium grease seems to take care of that.
> Michael de W5NIG
>> Message: 4
>> Date: Tue, 26 Oct 2010 23:20:24 -0400
>> From: "David Thompson"<firstname.lastname@example.org>
>> Subject: Re: [TowerTalk] Speaking of the HAM Seriesofrotators...How
>> doyoutell the difference.
>> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>> I have used a T2X since about 1980. It has the terminal strip on the
>> To put it inside my 71 foor Tristao crank up I had to remove one of the
>> sidebars. Lou Tristao advised putting a Rohn 25 guy bar around the middle
>> of the tower section. This takes some work but fits snugly.
>> The rotor has been to repair three times. The first after 8 or 9 years it
>> went to Allen WB4GNT who runs Max Gain Systems (MGS4U). He charged me
>> I sent to him as a tornado passed over the house and lifted the beams,
>> and rotor/rotor plate and tirned the whole mechanism
>> 45 degrees. Brad W9FX worked on it as it took a beating by Hurricane Ivan
>> and wind blasts at 85 to 90 MPH. He did find extensive damage but it was
>> fixed and that was 3 years ago.
>> Tristao/US Tower has what they call a sleeve bearing in the top of the
>> below the top plate. I bought a Fafnir commercial bearing that I placed
>> the top of the tower.
>> When I first moved to Atlanta in the mid 1970's I did buy a converted prop
>> pitch from a fellow in CA (Bob Leo). I think Bob was a WB6. The problem
>> with the prop pitch was it nearly broke the top of the tower off on one
>> occassion when a element caught in a tree. The HAM M/T2X is the only
>> that fits inside my tower. I looked at one of the RD1800's but its
>> bigger and not much better.
>> I do have another old T2X that I use as a temporary replacement when I
>> the main one off for repairs.
>> 73 Dave K4JRB
> TowerTalk mailing list
TowerTalk mailing list