Not so much they are bad. Just in the wrong spot. You can't tell the
difference between them by just looking at them. They could be just in the
wrong place.
You'll need a grid dip to see the difference. I would remove the screw and
slide the covers off first to make sure they are not burnt, don't have bugs
in them
as mentioned earlier also.
From: Rob Katz [mailto:rob.katz@thelegacycenter.com]
Sent: Monday, November 15, 2010 11:28 AM
To: towertalk@n4zkf.com
Subject: Re: [TowerTalk] A3S tribander gone bad
Dave,
Thanks for your reply. Sounds like I need to disassemble the beam and test
the traps to identify the bad one(s) - is that right? Do you know of a way
to do that test with an MFj259 antenna analyzer?
Thanks and 73,
Rob, KA1ARB
To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] A3S tribander gone bad
From: "n4zkf" <towertalk@n4zkf.co <mailto:towertalk@n4zkf.com> m>
Date: Mon, 15 Nov 2010 08:07:15 -0500
List-post: <towertalk@contesting.com
<mailto:towertalk@contesting.com%22> ">mailto:towertalk@contesting.
<mailto:towertalk@contesting.com> com>
Sounds like the traps are in the wrong spot and the only way to tell the
difference is with a grid dip.... Been there, done that....
73 Dave
n4zkf
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|