Towertalk
[Top] [All Lists]

Re: [TowerTalk] Short tower base question

To: "'Ed Swiderski, KU4BP'" <ku4bp@triad.rr.com>, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Short tower base question
From: "J.Gordon Beattie, Jr., W2TTT" <w2ttt@att.net>
Date: Wed, 17 Nov 2010 21:17:47 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Ed,
Do what the manufacturer requires and you won't have trouble.
Ask yourself who is climbing this thing and do you want to save a couple of
dollars on concrete and then have to address an issue should there be a
failure?  There might be VHF and UHF antennas today and BIG YAGIS TOMORROW.
Don't take the risk.
Thanks & 73,
Gordon Beattie, W2TTT
201.314.6964


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Ed Swiderski, KU4BP
Sent: Wednesday, November 17, 2010 9:09 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Short tower base question


All,

I have a couple full pieces and one cut piece of Rohn 25 that I'd like put
up against the house with a couple VHF antennas on it. (2m-16el and
432-18el) I plan on using a house bracket at about 3/4 of the height was
wondering if a full size base is neccessary? I have been told by a good
friend who used to work at installing towers that I can get away with a
smaller than spec base in this situation.

Thank you,
Ed KU4BP


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>