Towertalk
[Top] [All Lists]

[TowerTalk] Tuners

To: <towertalk@contesting.com>
Subject: [TowerTalk] Tuners
From: "Jim Thomson" <jim.thom@telus.net>
Date: Mon, 29 Nov 2010 01:32:55 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Date: Sun, 28 Nov 2010 00:09:45 -0500
From: "Tommy Alderman" <aldermant@windstream.net>
Subject: Re: [TowerTalk] Tuners

Wow Rick! That is really amazing? You ever think of getting a decent
receiver?

##  He already does. 




For the past 59 years I have used a 'tuner' and wires, but alas, using wire
antennas and I've only got 327 countries confirmed? Do you think if I get a
REAL antenna I could make the honor roll?

73 Rick,

Tom - W4BQF

##  is that 327 countries  spread over 160-10m, including warc bands? 
Is that spread over 59 years ?  Is this just ssb, or just cw,  or both, or does 
that
include rtty and data modes ? 

##  How many  countries....per band? 

##  a friend 150 miles north of me installed a F-12  5 el 20m yagi @ 70'.
He worked  290 countries in less than 2 yrs, and that
was casual dx'ing.  I managed a clean sweep in a Nov SS  phone contest
many yrs ago, that means I got WAS  in under 30 hrs. I could not do that
with wire ants. 

##  when  I switched from my own 5-el 20m yagi to the wire ant, the EU folks
told me I dropped 6 x S units [ I measured 13.8 db on a stepped attenuator, on 
RX]

##  sure, wire ants  will work,  provided you put em up 100'..and stuff loads 
of power
into them.   A dipole up 100' is a good ant.... but the  14 db F/S is a 
hindrance.  2 x dipoles
at right angles  or a rotary dipole is a fast way to pick up 14 db.   Most 
folks have limited patience. 
I have tried every ant in the book on 40m, since 1972.  I have given up and 
opted for a 3-el yagi up 90'.
Now if that doesn't work, then I will give up. 

Jim   VE7RF


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>