Date: Wed, 1 Dec 2010 14:55:12 -0500
From: "Zivney, Terry L." <email@example.com>
Subject: [TowerTalk] Freezing prop pitch rotor
I seem to be having some problems with my small prop pitch rotor freezing up
When the temperature is below freezing. I'm assuming it's a two part problem.
First, water must be getting in somehow.
Second, the water freezes when its cold.
My rotor installation looks like the fifth picture at
So, first, how do I manage to reduce water ingress?
Second, how do I manage to heat the rotor? I don't have 120v at the tower
And it is about 400 feet from the house.
Terry Zivney, N4TZ/9
## Is yours a k7nv prop pitch? I have a K7NV rebuilt PP, and it has a
1/8" diam hole in the very bottom of the motor housing, which is the lowest
point of the assy.
## The K7NV rebuilt PP's appear to have some of the holes plugged up on the
sides, and yet
some other's are open, and free to drain water.
Later.... Jim VE7RF
TowerTalk mailing list