[Top] [All Lists]

Re: [TowerTalk] Protecting fibreglass spreaders

To: "'Martin Sole'" <>, "'TOWERTALK@contesting. com'" <>
Subject: Re: [TowerTalk] Protecting fibreglass spreaders
From: "Gary \"Joe\" Mayfield" <>
Date: Mon, 6 Dec 2010 06:40:38 -0600
List-post: <">>
Although it is a fair amount of work.  I have had good luck wrapping things
with a sacrificial layer of electrical tape.

Joe kk0sd

-----Original Message-----
[] On Behalf Of Martin Sole
Sent: Sunday, December 05, 2010 6:51 PM
To: 'TOWERTALK@contesting. com'
Subject: [TowerTalk] Protecting fibreglass spreaders



I need to coat the spreader arms of my quad. Options for coverings are
limited to what I can source here in Thailand. I can buy polyurethane finish
but even the exterior grade ones I have seen are marked for wood and I'm not
sure if direct application to fibreglass would be appropriate. I am not
averse to coloured spreaders so would paint them if that would be a better
alternative. Should I then choose enamel, acrylic or some other type of


Particular brand or trade names are not much help as they are either not
available here or have different names! What about a coating of fibreglass


Would a better option be to wrap the spreaders in pvc tape or heatshrink





Martin, HS0ZED



TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>