Towertalk
[Top] [All Lists]

## Re: [TowerTalk] Fwd: current balance in ladder line?

 To: towertalk@contesting.com Re: [TowerTalk] Fwd: current balance in ladder line? Steve Hunt Wed, 19 Jan 2011 18:07:10 +0000 mailto:towertalk@contesting.com>
 ```You can have a dipole where each leg is equal length has an identical impedance to ground, and yet still have unequal currents. Picture such a "perfect" dipole fed with coax. The outside surface of the braid forms a "third" antenna wire which is capable of flowing CM current quite separately from the balanced Differential-Mode currents it is delivering to the feedpoint. That "third wire" connects to just one side of the dipole and has the potential to unbalance the currents. Depending on the length of the coax braid, how it is routed, and how it is grounded at the shack end, it's possible for almost all the current intended for one dipole leg to be "diverted" along the coax. A balanced antenna system doesn't guarantee balanced currents once you attach a feedline. Steve G3TXQ On 19/01/2011 17:53, Hans Hammarquist wrote: > You can, if you want, view the dipol as two pieces, each with one pole at the > feeder and the other pole at ground. If the the two part are equal, as we > intend to have them, the two "hot" poles, will have the same current. If, on > the other hand, we have an off-center feed the impedances will be unequal and > the only way to keep the current in he two poles equal is to "force" it with > an isolating balun such as a current choke. > > The current between the antenna wire and ground is, in scientific term, > called "displacement current". You actually have a current without a > conductor. That's the same type of current you have through a capacitor. > > Hans - N2JFS > _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk ```
 Current Thread [TowerTalk] current balance in ladder line?, Grant Saviers Re: [TowerTalk] current balance in ladder line?, Steve Hunt Re: [TowerTalk] current balance in ladder line?, Andy Re: [TowerTalk] current balance in ladder line?, jimlux Re: [TowerTalk] current balance in ladder line?, Steve Hunt Re: [TowerTalk] current balance in ladder line?, Ian White GM3SEK [TowerTalk] Fwd: current balance in ladder line?, Hans Hammarquist Re: [TowerTalk] Fwd: current balance in ladder line?, Steve Hunt <= Re: [TowerTalk] Fwd: current balance in ladder line?, jimlux Re: [TowerTalk] Fwd: current balance in ladder line?, Steve Hunt Re: [TowerTalk] Fwd: current balance in ladder line?, Tom Osborne Re: [TowerTalk] Fwd: current balance in ladder line?, Robert Harmon Re: [TowerTalk] Fwd: current balance in ladder line?, jimlux Re: [TowerTalk] Fwd: current balance in ladder line?, Steve Hunt Re: [TowerTalk] Fwd: current balance in ladder line?, jimlux Re: [TowerTalk] Fwd: current balance in ladder line?, Jim Brown Re: [TowerTalk] Fwd: current balance in ladder line?, jimlux Re: [TowerTalk] current balance in ladder line?, Andy