Towertalk
[Top] [All Lists]

Re: [TowerTalk] Soldering PL-259

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Soldering PL-259
From: "Rroger (K8RI on TowerTalk)" <k8ri-on-towertalk@tm.net>
Date: Fri, 21 Jan 2011 19:47:12 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 1/21/2011 7:13 PM, Jim W7RY wrote:
> Yucko!  Simply tin the braid. Then make the cut, and thread into the
> connector body. No "hairs" to come loose and short or arc because they are
> too close.
Yup!  Although this method does work, there are just too many negatives 
associated with it.

73

Roger (K8RI)
> 73
> Jim W7RY
>
>
>
> --------------------------------------------------
> From: "n4zkf"<towertalk@n4zkf.com>
> Sent: Friday, January 21, 2011 11:08 AM
> To:<towertalk@contesting.com>
> Subject: Re: [TowerTalk] Soldering PL-259
>
>> There are holes in the PL-259 for a reason. To solder the shield to on
>> the inside of the connector. See the link below.
>> Lots of hear "fast" is the trick. (along with flux)
>>
>> http://www.seed-solutions.com/gregordy/Amateur%20Radio/Experimentation/SolderCoax.htm
>>
>> 73 Dave
>> n4zkf
>>
>>
>> On 1/21/2011 1:57 PM, Tim Duffy K3LR wrote:
>>> Here is an easy method to solder PL-259 connectors
>>>
>>> http://www.k3lr.com/engineering/pl259/
>>>
>>> No longer using Made in USA generics
>>>
>>> Only using the Amphenol 83-1SP - PL-259 from Mouser
>>>
>>> 73,
>>> Tim K3LR
>>>
>>> -----Original Message-----
>>> From: towertalk-bounces@contesting.com
>>> [mailto:towertalk-bounces@contesting.com] On Behalf Of Tom Martin
>>> Sent: Friday, January 21, 2011 12:45 PM
>>> To: towertalk@contesting.com
>>> Subject: [TowerTalk] Soldering PL-259
>>>
>>>       A few weeks ago, I started with a 50' length of RG-213 and, after
>>> many
>>> attempts at soldering PL-259s, the coax was 44' long.  HI!
>>>
>>> Lately, I have been ordering coax lengths with the connectors already
>>> soldered.  I use them for runs from external antenna relays to the
>>> antennas.
>>>
>>> DIN plugs are the job that I really hate.  I order a few more than I need
>>> because of soldering errors.
>>>
>>> 73,
>>>
>>> Tom W8JWN
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1191 / Virus Database: 1435/3393 - Release Date: 01/20/11
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>