Towertalk
[Top] [All Lists]

[TowerTalk] Fwd: Re: Soldering PL-259

To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Re: Soldering PL-259
From: n4zkf <towertalk@n4zkf.com>
Date: Sat, 22 Jan 2011 07:35:39 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Exactly. A lot of heat fast! I use a small torch to tin it so it doesn't
melt any insulation.
I also use only Amphenol connectors also.

73 Dave n4zkf


On 1/21/2011 6:32 PM, Rroger (K8RI on TowerTalk) wrote:
>
>  When I used to use that type of connector I left the braid flat against
>  the dielectric with the end trimmed neatly, tinned the braid, and then
>  did the finish solder through the holes which only took a dab of solder.
>
>  There is a much better constructed "solder type" PL259 available that
>  has a barrel that is similar to the RG58 and RG8X adapters.  The braid
>  is soldered into the barrel, then the connector is assembled with the
>  center conductor being soldered last. It's *almost* impossible to put
>  one of these together wrong.  Like any others you have to make sure you
>  get the ones made with quality components, quality materials, and good QC.
>
>>>  _______________________________________________
>>>
>>>
>>>
>>>  _______________________________________________
>>>  TowerTalk mailing list
>>>  TowerTalk@contesting.com
>>>  http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>>
>>  _______________________________________________
>>
>>
>>
>>  _______________________________________________
>>  TowerTalk mailing list
>>  TowerTalk@contesting.com
>>  http://lists.contesting.com/mailman/listinfo/towertalk
>
>  _______________________________________________
>
>
>
>  _______________________________________________
>  TowerTalk mailing list
>  TowerTalk@contesting.com
>  http://lists.contesting.com/mailman/listinfo/towertalk
>
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Fwd: Re: Soldering PL-259, n4zkf <=