[Top] [All Lists]

Re: [TowerTalk] Soldering PL-259

Subject: Re: [TowerTalk] Soldering PL-259
From: Barry Gross <>
Date: Sat, 22 Jan 2011 16:27:48 +0000
List-post: <">>
On Fri, Jan 21, 2011 at 11:32 PM, Rroger (K8RI on TowerTalk) <> wrote:

> There is a much better constructed "solder type" PL259 available that
> has a barrel that is similar to the RG58 and RG8X adapters.  The braid
> is soldered into the barrel, then the connector is assembled with the
> center conductor being soldered last. It's *almost* impossible to put
> one of these together wrong.  Like any others you have to make sure you
> get the ones made with quality components, quality materials, and good QC.

Can someone provide a link to an example of this "better constructed solder
type PL259" with the barrel for RG213 size coax?

Thanks & 73,
Barry N1EU

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>