If you put the two beams parallel, with the Steppir below the 40m beam
at the correct spacing for the Steppir to act as a 40m reflector
element, then you could control the elevation angle of radiation from
the 40m beam. With the Steppir tuned to 6m or 10m, there would be
minimal interaction, so the 40m beam would radiate in low-angle DX mode.
With the Steppir tuned to 40m, it would act as a reflector, causing the
40m beam to radiate in more of an NVIS pattern, for working local stations.
On 26/01/11 07:41, email@example.com wrote:
> I am sure this has come up quite a bit. I want to assess the
> possibility of placing 2 ele 40m beam above a Steppir 3 ele. The
> twist is that the Steppir has the 40m dipole add on. Was thinking of
> placing 40m beam perpendicular to it. What are ur thoughts? Really
> would like some gain on 40. Thanks.
TowerTalk mailing list