[Top] [All Lists]

[TowerTalk] 40m monbander and multibander stack question...

To: <>
Subject: [TowerTalk] 40m monbander and multibander stack question...
From: "Michael W5NIG" <>
Reply-to: Michael W5NIG <>
Date: Wed, 2 Mar 2011 20:58:54 -0600
List-post: <">>
  hey gang!   I'm slowly recovering from some tower issues (bad storm, 
tower/antenna damage etc) and am rebuilding my tower stuff.

Anyway have just finished getting my 64' T-500 Trylon freestanding tower 
back up properly with a couple of new sections.

My previous setup was this:

24' mast, down about 8' or so (I think) in the tower to the rotator.  Had a 
Force 12 5BA (20-10 including warc bands) mounted right above
the thrust bearing.

Had an M2 linear loaded 3 ele. 40m monobander about 8 to 10 ft above that 
and 5 or 6 foot above that some phased 2m beams.

Had some issues with the 40m beam (operator error in some assembly) and got 
that fixed, but a MAJOR pain to get to since it was up on the stack.

Anyway this time around I am just about to get the Force 12 5BA fixed up and 
have a M2  four element 40m monobander on order and would REALLY like
to put it right above the thrust bearing for easy access just in case I have 
to fix any operator errors :)

I don't think I've seen a 40 on bottom and multibander on top, usually the 
other way around.   Anyone done it this way and any issues?  (besides the 
drop in height etc.)

  Thanks in advance,
     Michael  de W5NIG 


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>