Hi Les et al,
First, Many Thanks for your response regarding the point and shoot issue.
I am using Writelog and I have my OR-2800 rotor setup to go to the DX
stations heading that I am working. It uses the existing RS-232 port on
the rotor controller. It works great!! I am very happy with it.
I was just looking for a simple mod to add a "Point and Shoot" pot
to the controller to use when I am not running Writelog, similar to the
Green Heron controller!
It looks like it would be involved and expensive to accomplish this mod.
And it is not worth $600.00 to me to buy a new GH controller. It is not
important, just a nice feature to have...
See ya soon,
On Fri, 04 Mar 2011 16:47:37 -0500 Les Kalmus <firstname.lastname@example.org> writes:
> Hi Ted,
> I have been reading the mail about your wanting to control your
> Orion by
> point and shoot.
> It occurred to me you might want to look at a little program called
> rotor control that comes free with N1MM.
> It has 10 or 12 presets that you make up and it remembers and one
> on one preset turns the rotor there.
> You can also enter a heading directly in a little box and click and
> rotor goes there.
> If you use it with N1MM it's even more flexible.
> I used this program for a while before I switched over to DXLAB
> does the same thing except for non-contest use.
> You need to download N1MM and install it to get the rotor program
> but if
> you don't want to do that, I think I can send you a copy of just
> program alone.
> Let me know.
> 73, Les
Groupon™ Official Site
1 ridiculously huge coupon a day. Get 50-90% off your city's best!
TowerTalk mailing list