[Top] [All Lists]

Re: [TowerTalk] Heat shrink Tubing

To: towertalk <>
Subject: Re: [TowerTalk] Heat shrink Tubing
From: Steve Maki <>
Date: Thu, 10 Mar 2011 12:24:20 -0500
List-post: <">>
+1 on I've purchased thousands of dollars worth of 
shrink tube from them (for commercial installs) and have been happy with 
the quality, service, and value - their tubing runs about half of what 
3M costs. For connectors I buy the 3 to 1 "dual wall" medium wall black. 
The "dual wall" refers to the adhesive lining.

-Steve K8LX

On 3/10/2011 12:06 PM, Bill Winkis wrote:

> Here you go ....
> Been using this stuff for over 10- years and have had ZERO failure....I
> use the "UV/adhesive Type" ..and seal the ends with "Loctite Epoxy
> Repair Putty....
> About 2 inches from the join (Connector or...??) I make a bead of the
> epoxy around the wire/co-ax ... then slide the tubing over the epoxy the
> connector and the epoxy ...then nead the tubing into the epoxy on both
> ends..then heat gun shrink!!!
> -Bill


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>