[Top] [All Lists]

Re: [TowerTalk] Temporary guys

To: <>, <>
Subject: Re: [TowerTalk] Temporary guys
From: "John Langdon" <>
Date: Wed, 30 Mar 2011 13:47:50 -0500
List-post: <">>
If you use Phillystran, it may be wise to have a EHS guy already made up
that could replace your longest Phillystran guy (or any of the shorter ones)
if they get damaged by abrasion or falling debris.

73 John N5CQ

-----Original Message-----
[] On Behalf Of
Sent: Wednesday, March 30, 2011 1:33 PM
Subject: [TowerTalk] Temporary guys

Howdy, TowerTalkians --
    I just read a portion of the ARRL tower book where  the author recounts 
an episode where the temporary rope guys holding the bottom  sections of 
the tower stretched so much that he found himself laying on the  ground with

the tower laying on top of him. Similarly, W2GD had the same  thing happen
him. In neither case was the climber terribly injured but they  were lucky 
to fall onto soft ground. 
    If you're going to do something like this (the use  of temporary guys 
has its applications) and use rope, the best thing to do is to  use a 
'trucker's hitch' which gives you a 2:1 mechanical advantage and provides
more tension on the rope to minimize any stretch or failure. 
    In the book, the author says he only uses steel  temporary guys now - 
lesson learned. But using a trucker's hitch will make using  rope guys
and safe. 
Steve      K7LXC
_www.championradio.com_ ( 

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>