As long as we are on the topic, which would be better?
1) secure the 4 inch conduit sections together in the trench and then fill
in the trench with dirt on top so the sections could not move when pulling
cables through them, or
2) keep the trench unfilled, but the 4 inch conduit sections put together,
and pull the cables through them without the dirt on top?
As I see it, once you put the dirt on top, there is no going back, but the
conduit does not move. On the other hand, conduit without weight on it will
tend to move as the cables as pulled through, especially when the "last"
cable is tried.
Comments from you who have done this.....
Nine Mile Falls, WA
TowerTalk mailing list