It appears you have a Mosley MP-33 antenna. See
Don't sweat the small stuff. Put the anntena as high as possible for testing
and using an analyzer see that the SWR curve looks like on 20, 15 & 10.
If the curves look like what is in the instruction manual (but shifter lower
in freq if antenna is low to ground) then you should be good to go.
73 & GL
----- Original Message -----
From: "Marc Tessier - VE3TES" <email@example.com>
Sent: Wednesday, April 13, 2011 7:54 PM
Subject: [TowerTalk] Need help with a Mosley TA-33 JR
>I recently bought a real old Mosley TA-33JR triband yagi, I am questioning
>the traps for the driven element, according to the manual it states the
>traps should measure 13 1/2" long, yet the ones I received with this unit
>measure approx 12" in length, and also the traps for the driven element is
>a fair amount larger in dia. for example the traps on the dir and ref are
>close to 1.25" in dia, while the 2 for my driven element measure close to
>2" in dia. I am suspecting that at one point someone fried the original
>traps and obtained a pair from a TA-33 and inserted these into the mix.
> Now for my question, if I can even use these 2 traps, what dimensions
> should I use for the length of the driven element, the ones from the
> TA33JR or the TA33?
> Seeing as the color coding has long been washed away from the effects of
> the sun and weather, its impossible to tell for sure just by looking at
> these traps, but I can tell you that by removing the covers from the
> traps, I was able to identify the coil windings accurately match that of
> the TA33.
> Marc Tessier - VE3TES
> ve3tes @ cogeco . ca
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 6039 (20110413) __________
> The message was checked by ESET NOD32 Antivirus.
> TowerTalk mailing list
TowerTalk mailing list