On 4/14/2011 8:41 AM, Steve K7AWB wrote:
> I see you are using the Ham Radio Operator's official motto in your
> "And all of this as cheap as possible."
> For my towers, I will be using metal Hoffman-type enclosures with rubber
> seals around the door, probably NEMA 3, 4, or 12. I have several I got from
> work before I retired. They will be mounted at the bottom, a few up from
> the pad.
Be sure to paint them and particularly the hinge and seal area. Then be
sure to lubricate the hinge and put a thin layer of either silicone
grease or Vaseline on the gasket. Both of these areas are highly prone
to rusting if additional protection is not taken.
> Steve Sala
> Nine Mile Falls, WA
> TowerTalk mailing list
TowerTalk mailing list