Look at this:
http://www.thewireman.com/prodpix5.html
second row from the top.
Clint Talmadge - W5CPT
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of W1JCW
Sent: Saturday, May 14, 2011 6:49 PM
To: reflector -tower
Subject: [TowerTalk] Discharge with a dipole
A previous post suggested a spark plug on each terminal the ladder line
connected to.
So the resister would go from each terminal and tie the other end to a
ground rod ?
I run 250' center feed 450 ladder line down to a 4:1 balun.
73-
W1JCW
John
From: Jim Lux
Sent: Saturday, May 14, 2011 5:59 PM
To: K2VI
Cc: <towertalk@contesting.com>
Subject: Re: [TowerTalk] zapped with my dipole. OUCH!
A 1meg resistor to ground?
On May 14, 2011, at 13:29, "K2VI" <k2vi@cox.net> wrote:
> It seems every time there's distant lightning and i go to disconnect
> the dipole i get this nasty discharge when i touch the pl-259. Im
> concerned it will eventually damage my tuner and or radio. The antenna
> is not dc grounded like my beam or vertical are. It is a ladder line
> fed antenna terminating into a 4:1 balun outside the shack and a 3'
> run of rg8 coax to the tuner. How can i bleed this static off? I heard
> from a ham friend the jump a 2.5 MH RF choke between the two terminals
> of the 4:1 balun where the ladder line connects.Any advice would be
> greatly apreciated.73 tony k2vi
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|