[Top] [All Lists]

Re: [TowerTalk] Probably stupid coax question

To: Mark Robinson <>
Subject: Re: [TowerTalk] Probably stupid coax question
From: jim feldman <>
Date: Wed, 22 Jun 2011 22:04:22 -0700
List-post: <">>
okay, I'll give em a try.  Just put in an order @ Allied electronics.  I
went to amphenol's site, and their drawing shows an .125" ID for the pin,
but oddly doesn't show the OD.  The ones I have might be .015 or so shy of
their spec

thanks all for the help

On Wed, Jun 22, 2011 at 3:58 PM, Mark Robinson <>wrote:

> Yes that center conductor is big. The connectors that work with this coax
> are Amphenol connectors UHF-182120 that I buy from The RF Connection. I use
> this coax a lot and have put on many connectors. I had the same problems
> initially but the UHF-182120 connectors work a treat. Make sure that you
> don't disturb the weave/lay of the inner conductor.
> No need to snip any strands away with this connector.
> Mark N1UK

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>