[Top] [All Lists]

Re: [TowerTalk] control cables lightning protection

To: "Kostas Stamatis" <>, <>
Subject: Re: [TowerTalk] control cables lightning protection
From: "Mark Robinson" <>
Date: Fri, 24 Jun 2011 10:39:18 -0400
List-post: <">>
I put an MOV with a cap in parallel from each line to the tower ground. I 
have MOV's in the box at the bottom of the tower and also at my SPG box.

Depending on the control voltage I think that I had 19V and 56V MOV's

Mark N1UK

----- Original Message ----- 
From: "Kostas Stamatis" <>
To: <>
Sent: Friday, 24 June, 2011 1:15 AM
Subject: [TowerTalk] control cables lightning protection

> Hello to all...
> I want to protect from lightning and static charges my rotator cable as a
> controller cable for a switch. I have seen some solutions in DXengineering
> but i would prefer a reliable homebrew solution. Anyone with some ideas?
> _______________________________________________
> _______________________________________________
> TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>