Towertalk
[Top] [All Lists]

Re: [TowerTalk] HAM-IV Ball Bearings

To: TowerTalk@contesting.com
Subject: Re: [TowerTalk] HAM-IV Ball Bearings
From: Richard Solomon <dickw1ksz@gmail.com>
Date: Mon, 27 Jun 2011 19:02:45 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
So far, I have received two responses on the size. One said 1/4", the
other said 3/8".
Sort of renews my faith ....

Guess I'll just open the thing up and measure them.

73, Dick, W1KSZ

On Mon, Jun 27, 2011 at 6:49 PM, Charlie Gallo <Charlie@thegallos.com> wrote:
>
> On 6/27/2011 Bryan Swadener wrote:
>
>> You'd also need to know the alloy and hardness
>
> I've bought a stack of ball bearing balls over the years, and not once did I 
> have to spec alloy and hardness.  You buy "Ball Bearing Balls".  Let's face 
> it, our rotors are not high speed, high precision applications for these 
> things
>
> --
> 73 de KG2V - Charles Gallo
> Quality Custom Machine-shop work for the radio amateur (sm)
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>