Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu rotors

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Yaesu rotors
From: Pete Smith <n4zr@contesting.com>
Reply-to: n4zr@contesting.com
Date: Thu, 11 Aug 2011 10:16:16 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I am using A-series control boxes with smaller rotators (800 and 1000) 
from the old S series, and they work fine.  Just check your cable pinouts.

73, Pete N4ZR

The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at 
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000



On 8/11/2011 9:43 AM, TexasRF@aol.com wrote:
> The voltages are compatible. Be aware there are SDX and DXA versions and
> you might want to do some checking before just connecting them together.
>
> 73,
> Gerald K5GW
>
>
>
>
> In a message dated 8/11/2011 8:25:39 A.M. Central Standard Time,
> n1nk@cox.net writes:
>
> Anyone  know if a G1000 rotor and G2800 control box (or vice versa)  are
> compatible?  Not necessarily for long term use but for a bit of  debugging.
>
>
>
> Jim/N1NK
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk  mailing  list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>