I'm away from home, but it seema like my die is something like 0.178. I
usually refer to a table that I down loaded fromm RF Industries web page.
The strip lengths are not always dead on for other company's connectors, but
the crimp dimensions are usually dead on. Can't remember where I got they
die, maybe from Joel at
Jim K0XU Sent from my Xoom tablet
On Aug 15, 2011 4:25 PM, "Pete Smith" <email@example.com> wrote:
> I am trying to figure out which die to use in a ratchet crimper for
> RG-174 - the outer ferrule, not the pin. One web reference says
> .213,but that is too large. The guys who sold me the connectors don't
> know, and the guys who sold me the crimping tool insist it should be
> .128, which is far too small. The die sizes I have jump from .213 to
> .128 with no intermediate sizes.
> The crimping tool that I bought is a generic Chinese type with no
> visible brand except for G and K on the two die sets I have. If I need
> another die size, any idea where I might get them?
> 73, Pete N4ZR
> The World Contest Station Database, updated daily at
> The Reverse Beacon Network at http://reversebeacon.net, blog at
> spots at telnet.reversebeacon.net, port 7000
> TowerTalk mailing list
TowerTalk mailing list