Open up all the traps and clean out bugs, cobwebs, etc. When replacing the
end caps, be sure they make a good seal.
Make sure all the hardware (clamps, nits & bolts, sheet metal screws) are in
good condition, and replace where necessary with new stainless steel.
Wouldn't be a bad idea to replace the coax balun with new coax (read docs
for velocity factor).
When you assemble it , make sure the elements are in the correct positions.
The CL36 is a good antenna and should be a good performer for you and give
you many years of service.
Good luck and 73
----- Original Message -----
From: "Robert Hlywka" <email@example.com>
Sent: Saturday, August 20, 2011 2:44 PM
Subject: [TowerTalk] Mosley CL-36 maintenance
> I picked up a Mosley CL-36, that I purchase off a retired ham. The
> antenna has been stored inside for the last 10 years, it looks as new. I
> am getting ready to put it up, is there any maintenance that should be
> done to this before I hoist it up. I am a new ham and this is my first
> beam, any help would be welcomed.
> TowerTalk mailing list
TowerTalk mailing list