[Top] [All Lists]

Re: [TowerTalk] Control Cable Connector for Yaesu 450A rotor

To: Rev Grant Nicholls <>
Subject: Re: [TowerTalk] Control Cable Connector for Yaesu 450A rotor
Date: Tue, 23 Aug 2011 07:19:08 -0400 (EDT)
List-post: <">>
There are at least two possible solutions to ponder. I see connectors, from 
time-to-time, on Ebay. HRO sells a 100+ foot length of cable with both 
connectors attached. I am sure there are other opinions. Good luck in your 

Semper Fi,

Tommy - K6YE

----- Original Message -----
From: Rev Grant Nicholls <>
Sent: Mon, 22 Aug 2011 20:24:09 -0400 (EDT)
Subject: [TowerTalk] Control Cable Connector for Yaesu 450A rotor

Not sure if it was my fingers or the email last time!  Here is the 
message without errors!


After a hiatus of several years I put the rotor up on a 50 tower this weekend 
only to find out the little plastic connector and pins are not on the control 
box end of the control cable.  Tried all over to find a plug- Yaesu will gladly 
supply one for nearly the price of a cheap rotor. Anyone out there who can 
solve my problem from their junk drawer? 73 and thanks in advance.

May God bless your day.


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>