[Top] [All Lists]

[TowerTalk] N2JFS Tower Comments

To: <>
Subject: [TowerTalk] N2JFS Tower Comments
From: "Wilson Lamb" <>
Reply-to: Wilson Lamb <>
Date: Thu, 25 Aug 2011 08:19:46 -0400
List-post: <">>
Great!  Where's the beam?
What kind of winch did you use?
If there's a weak point, it's the bottom slab.
Beware of electrolysis at the ground clamps.
I don't like the screws in the clamps.  You can't get them really 
tight...I've changed some to hexhead bolts.
You have enough screws to crack it easily.
Fortunately, if the slab cracks you'll have a pinned base and stresses will 
be reduced.
Unfortunately, if one leg cracks out, the others will get more load.
I think keeping the guys fairly tight will limit bending and cracking, I 
Maybe some real engineers will chime in.

Message: 8
Date: Wed, 24 Aug 2011 23:56:15 -0400 (EDT)
Subject: [TowerTalk] Want comments on tower installation
Message-ID: <>
Content-Type: text/plain; charset="US-ASCII"

After some (a lot) difficulties my tower is finally in position. It is not
put up in a "normal" way but rather the way I found practical and
applicable.  You find the pictures at

Locking forward to comments, hopefully not to devastating.

Hans - N2JFS


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] N2JFS Tower Comments, Wilson Lamb <=