Tweak = bent?
My tower base was bent when I got it from the previous owner. I took it to a
local metal fabrication shop with a drawing proper dimensions and they used
a hydraulic press and heat to put it back into shape for one hour's
If you've put it in concrete bent, then you might have a more complicated
Good luck and 73,
On Mon, Aug 29, 2011 at 5:24 PM, Joe Pace <email@example.com> wrote:
> I'd appreciate any pointers on how to untweak a Tri-Ex W-51 tower base.
> The apex (non-hinging) rebar with the flange welded to it is slightly
> bent outwards between the points where it's welded to the bolt flange
> and to the other rebar members of the cage. It's tweaked just enough
> that the bolt holes don't align (about 1/2" off at the worst.
> TowerTalk mailing list
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and
I will learn.” Teton Lakota, American Indian Saying.
TowerTalk mailing list